Don't just take our word for it

Lots of brands say their filter works. We wanted proof. Shower head+ was independently tested by SGS to reduce chlorine, so your shower can finally be the good part of your day..

OUR TESTING

Real water. Real testing.

We built Morabel to bring clarity to what’s in your water — and confidence in how it’s treated. Every claim is backed by independent laboratory testing, conducted to internationally recognised standards. No assumptions, no shortcuts — just verified performance you can trust.

Completed NSF/ANSI 177 — Chlorine Reduction

Description

Independently tested by SGS in accordance with NSF/ANSI 177 to reduce chlorine throughout the full lifespan of the filter, improving water quality for a cleaner shower experience.

Full report

Test details

Chemicals tested
Free Available Chlorine
Reduction level
Up to >99% initial reduction, maintaining >50% reduction at 8000 litres (NSF/ANSI 177 compliant)
Completion date
10 March 2026
Litre count
Tested up to 8000 litres capacity
Testing lab
SGS-CSTC Standards Technical Services
Lab location
Ningbo, China
Completed NSF/ANSI 53 — Lead Reduction

Description

Independently tested by SGS in accordance with NSF/ANSI 53 to reduce lead in water at pH 6.5, demonstrating effective reduction of heavy metals at the start of the filter’s service life.

Full report

Test details

Chemicals tested
Lead (Pb)
Reduction level
95.47% reduction at startup (NSF/ANSI 53 test conditions)
Completion date
10 March 2026
Litre count
Startup test only (initial performance, not full lifecycle)
Testing lab
SGS-CSTC Standards Technical Services
Lab location
Ningbo, China
Completed NSF/ANSI/CAN 372 — Lead Content Compliance

Description

Independently tested by SGS to verify that all wetted components meet NSF/ANSI/CAN 372 requirements for lead content, ensuring materials are compliant for safe contact with water.

Test details

Chemicals tested
Lead (Pb) content in wetted materials
Reduction level
Compliant — ≤0.25% weighted average lead content (NSF/ANSI/CAN 372 standard)
Completion date
9 March 2026
Testing lab
SGS-CSTC Standards Technical Services
Lab location
Ningbo, China

Certifications

Made for Australian homes

Every shower head sold in Australia must be WaterMark certified and WELS registered before it can legally be installed. Shower Head+ has been assessed to the relevant Australian Standards by an accredited certification body and independent testing laboratory.

Completed WaterMark Certification — AS/NZS 3662

Description

Certified by IAPMO under the ABCB WaterMark Certification Scheme. Licence number WM‑032533, covering both the Black (MB‑SF‑BLK) and Chrome (MB‑SF‑CHR) models. Certified to AS/NZS 3662 for performance of showers for bathing, with a 5‑year certificate and annual surveillance. Rated 150–500 kPa, 2–55 °C, for installation to AS/NZS 3500.

Full report

Test details

Testing lab
IAPMO
Lab location
Perth, WA (Australia)
label: Licence number
WM-032533
Models covered
MB-SF-BLK, MB-SF-CHR
Completed WELS Rating — AS/NZS 6400

Description

Tested by an independent NATA-accredited laboratory to AS/NZS 3662 and rated under the Water Efficiency Labelling and Standards (WELS) scheme. 3-star water efficiency rating with a nominal flow of 8.0 L/min, fitted with a flow controller for consistent pressure at low water use.

Test details

Testing lab
Plumbing Testing Laboratory
Lab location
Australia
WELS rating
3 stars
Flow rate
8.0 L/min